Reunion 1.1 for p3dv4 crashes

[AFR6752]

No problem with this file as well. Are you sure the CTD is realted to our scenery? You have a big number of addons and if I understand correctly you said the scenery worked just fine after a new install?

Yes it has to be, once I remove the addon xml files for Reunion and start p3d v4 again, it loads everything in fine.

[horst18519]

Did the scenery work before?

[AFR6752]

Did the scenery work before?

I was able to load it once but forgot what settings in the configuration program I had set. There must be a bgl file not compatible with p3dv4 like a ground traffic or effect file. Not time until the weekend for me to play with the settings again is there anything you could check or even remote into my computer to see?

[AFR6752]

There are 92 bgl files in my scenery folder for Reunion is that right? It is an effect or bgl file causing this.

[horst18519]

Actually there should only be 91 files and not all of them should be bgl files since some are optional and set to .off.
I don't think that's the source of the problem though.
To limit the number of possible sources please open the add-on.xml file in the FSDG-Reunion folder and remove the following content:

Code: Select all

    <AddOn.Component>
        <Category>SimObjects</Category>
        <Path>SimObjects\Airplanes</Path>
        <Name>FSDG-Reunion-AI-SimObjects</Name>
    </AddOn.Component>
    <AddOn.Component>
        <Category>Texture</Category>
        <Path>Texture</Path>
        <Name>Reunion Autogen Textures</Name>
		<Type>GLOBAL</Type>
    </AddOn.Component>

[MOISE]

Hello
I have the FSDG REUNION scenery and I am confronted with the problem of crashes on FMEE final.
I don't know if I have version 1.0 or 1.1
How to know it please.
Where find the update?

Thanks

[horst18519]

The name of the installer tells you which version. Where did you purchase it?

[MOISE]

The name of the installer tells you which version. Where did you purchase it?

The name is: FSDG-REUNION_P3DV4
Purchase at simmarket

There is no link for update ?

[AFR6752]

The name of the installer tells you which version. Where did you purchase it?

My installer is Aerosoft and the file name is FSDG-REUNION_P3DV4.exe and the detail properties say product version 2.0.0.44
That's the old installer not v1.1?

[horst18519]

That should be the most recent version. Where did you epxerience the crash? Which aircraft did you use?

[AFR6752]

That should be the most recent version. Where did you epxerience the crash? Which aircraft did you use?

any default aircraft

[MOISE]

I use 777 pmdg.
My problem is : At the announcement one hundred there is a kind of "trembling" and the plane hardly touches the ground

[horst18519]

Where does that crash happen? (which runway)

[MOISE]

Where does that crash happen? (which runway)

I don't know if the question is addressed to me but my problem arises when landing on track 14. It does not do it every time. So I do not understand where it comes from.

[AFR6752]

Where does that crash happen? (which runway)

I don't know if the question is addressed to me but my problem arises when landing on track 14. It does not do it every time. So I do not understand where it comes from.

If you have Orbx Vector you have to run the airport elevation correction scanner and make sure it finds FMEE and disables the Orbx afcad and elevation files. edit an in addition I do not believe the orbx program can scan any scenery that uses the addon.xml rather than scenery.cfg entries so you must manually enter FMEE in the Orbx scanner to disable.

[AFR6752]

[quote="horst18519"][/quote]

VOBL installed just great not a single error but Reunion refuses to load. Is there something else I can try to get Reunion loading?

[horst18519]

If the scenery worked before I don't think there's a general error with the installation. Maybe the AI traffic provokes the crash. What you can try is to remove the following content from the add-on.xml in the FSDG-Reunion folder:

Actually there should only be 91 files and not all of them should be bgl files since some are optional and set to .off.
I don't think that's the source of the problem though.
To limit the number of possible sources please open the add-on.xml file in the FSDG-Reunion folder and remove the following content:

Code: Select all

    <AddOn.Component>
        <Category>SimObjects</Category>
        <Path>SimObjects\Airplanes</Path>
        <Name>FSDG-Reunion-AI-SimObjects</Name>
    </AddOn.Component>
    <AddOn.Component>
        <Category>Texture</Category>
        <Path>Texture</Path>
        <Name>Reunion Autogen Textures</Name>
		<Type>GLOBAL</Type>
    </AddOn.Component>

[AFR6752]

If the scenery worked before I don't think there's a general error with the installation. Maybe the AI traffic provokes the crash. What you can try is to remove the following content from the add-on.xml in the FSDG-Reunion folder:

Actually there should only be 91 files and not all of them should be bgl files since some are optional and set to .off.
I don't think that's the source of the problem though.
To limit the number of possible sources please open the add-on.xml file in the FSDG-Reunion folder and remove the following content:

Code: Select all

    <AddOn.Component>
        <Category>SimObjects</Category>
        <Path>SimObjects\Airplanes</Path>
        <Name>FSDG-Reunion-AI-SimObjects</Name>
    </AddOn.Component>
    <AddOn.Component>
        <Category>Texture</Category>
        <Path>Texture</Path>
        <Name>Reunion Autogen Textures</Name>
		<Type>GLOBAL</Type>
    </AddOn.Component>

That did not fix my ctd, p3dv4 does not show the loading screen unless I remove the 2 addon.xml files for the Reunion scenery

[horst18519]

If you remove the add-on.xml in the FSDG-Reunion folder and start P3D, shut down P3D, add the add-on.xml again and start P3D it should ask you if FSDG-Reunion should be added to P3D. Does this happen?
If not there must be some relict of a previous installation somewhere in the P3D files, be it the add-ons.cfg, the scenery_add-on.xml or the scenery.cfg.

[AFR6752]

If you remove the add-on.xml in the FSDG-Reunion folder and start P3D, shut down P3D, add the add-on.xml again and start P3D it should ask you if FSDG-Reunion should be added to P3D. Does this happen?
If not there must be some relict of a previous installation somewhere in the P3D files, be it the add-ons.cfg, the scenery_add-on.xml or the scenery.cfg.

It happens, the addon is added by p3d again. There is no conflict I can see, and other scenery is fine like your just released VOBL.