MSFS CUSCO Scenery issues

Support for all FSDG products
Post Reply
NachoCrisp
Posts: 5
Joined: Fri Feb 12, 2021 2:04 pm
FS-Version: MSFS

MSFS CUSCO Scenery issues

Post by NachoCrisp » Fri Feb 12, 2021 2:19 pm

Hello,

I just installed MSFS CUSCO and wanted to pass on a few areas of concern that should be addressed.

The most important one - which makes it very difficult to fly into or out of CUSCO - is there are NO SID / STAR / APPROACH options available in the FMC for the A320. Previously, when I flew there with default scenery - all options were available. (I have Navigraph data).
I can enter waypoints manually but there are dozens of waypoints with lots of speed and altitude constraints at Cusco - this is not a practical solution.

Other issues:
1) The black roadway next to taxiway "C" becomes grass covered as you taxi along "C".
2) Yellow Number above Jetway B3 shows "1" & Jetway B4 shows "1" (Jetways 1 & 2 are correct) **(I didn't notice if numbers on SIDE of jetway were correct).
3) There is a large bush blocking the "B" taxiway sign on the left side (when facing runway)
4) There is a small tree on "D" seems misplaced - right side (when facing runway)
5) TWO windsocks close together near Threshold of Rwy10.

I hope these issues are easy to fix and look forward to enjoying the scenery.
Thanks

Jose Altieri

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by horst18519 » Fri Feb 12, 2021 6:13 pm

Thanks. We'll be looking into these items.
- Thorsten -

Image
FSDG-online.com

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by horst18519 » Wed Mar 03, 2021 9:58 am

With the new version (v1.2), these issues should now be fixed.
- Thorsten -

Image
FSDG-online.com

NachoCrisp
Posts: 5
Joined: Fri Feb 12, 2021 2:04 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by NachoCrisp » Fri Mar 12, 2021 4:00 am

Hello,

I just installed V1.2 and the jetway / gate numbers have been fixed - Thanks.

However, I still cannot select a SID or STAR or APPROACHES into Cusco in the FMC. Same for the in game flight planner - the drop down menu for Cusco is blank.
I am using Navigraph data and I am able to select these options for other payware airports.

Is there anything else I need to do?

Thanks.
Jose Altieri

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by horst18519 » Sat Mar 13, 2021 11:08 am

There does seem to be a difference in available waypoints between the default and our scenery. At the moment we don't know why that is the case.
- Thorsten -

Image
FSDG-online.com

jasonarmstrong
Posts: 2
Joined: Mon Mar 15, 2021 2:19 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by jasonarmstrong » Mon Mar 15, 2021 2:20 pm

Thank you! Wondering if there was an update on this as previously noted makes flying in and out of Cusco very difficult. I've never encountered this in other sceneries purchased.

Thank you so much for your updates!

NachoCrisp
Posts: 5
Joined: Fri Feb 12, 2021 2:04 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by NachoCrisp » Mon Mar 15, 2021 8:22 pm

Hello,

Just an update.

I asked on the Navigraph forum if the missing SPZO approach info could be from their end.
They responded that when loading the default SPZO, all of the airport approaches / sids are available.
(Silly, I never thought of trying that ;-) )

They think it is an addon scenery file issue - as you noted some discrepancy in the available waypoints.
Unfortunately, MSFS seems very fragile with regards to navigation discrepancies - I hope you guys can find the problem.

Good Luck!

Joe

jasonarmstrong
Posts: 2
Joined: Mon Mar 15, 2021 2:19 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by jasonarmstrong » Mon Mar 15, 2021 8:40 pm

I had no issues with having SID/STAR's available to select for SPZO prior to installing this scenery. Now it shows completely blank. Granted prior to installing there were some discrepancies with waypoints in the available selectable SID/STAR's but at least there was something to work with.

Now it simply shows blank and none are available to select which leads me to believe it is certainly an issue with the scenery. I wonder if it has to do with the name change script that the installation had me run.

Hope it can be solved.

NachoCrisp
Posts: 5
Joined: Fri Feb 12, 2021 2:04 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by NachoCrisp » Wed Mar 17, 2021 2:17 pm

UPDATE 2:

Hello Horst18519,

I've been in contact with Richard (FMS Data Developer) at Navigraph.
He had a look at your SPZO MSFS scenery in Developer Mode and passes this information on:

"This is a scenery issue - the scenery designer delete all approaches, departures and arrivals in the scenery. The addon sceneries has a higher priority and therefore they overwrite our whole navdatas for this airport (terminal procedures)."
You see it in the dev-mode of the sim: (photo attached)

I hope this helps.

Take Care!
Joe
Attachments
ec62480d86750d333d6bef981e268ec01c1d8a5d_2_1380x214.jpeg

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by horst18519 » Wed Mar 17, 2021 7:07 pm

Looks like there was a leftover from when we tried to force MSFS to change the wrong default airport name. We eventually decided to use the small tool for that - but the line was left in the bgl.
Please download the new version v1.3 (should be available in the other shops by friday) and try again.
- Thorsten -

Image
FSDG-online.com

NachoCrisp
Posts: 5
Joined: Fri Feb 12, 2021 2:04 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by NachoCrisp » Wed Mar 17, 2021 7:22 pm

Thanks!

I'll wait for Simmarket to receive the update - I'll let you know how it goes.

Take Care!
Joe

ploric
Posts: 2
Joined: Sun Mar 28, 2021 9:34 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by ploric » Sun Mar 28, 2021 9:44 pm

Hi, I am having exactly the same problem.

I purchased through the Content Manager yesterday and it shows 1.2.2 version

It looks as if 1.3 version is not available yet.

I understand the update will be available shortly through FS2020 as an scenery update.

Regards

ploric

ploric
Posts: 2
Joined: Sun Mar 28, 2021 9:34 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by ploric » Thu Apr 01, 2021 6:00 pm

Hi there, 1.3 version is not available yet from the Content Manager.

Please advise

Regards

ploric

User avatar
Er!k
Posts: 120
Joined: Tue Jan 10, 2012 7:14 am
FS-Version: FS11

Re: MSFS CUSCO Scenery issues

Post by Er!k » Fri Apr 02, 2021 12:52 pm

I think you can only wait... Every update needs to be checked by Microsoft and it delays the process. After files are send it can take up to 2-3 weeks until an update appears on the Marketplace. Maybe Thorsten can check the status?
i9-12900k, 32GB RAM, Geforce 3080 10GB, Microsoft Flight Simulator, Windows 11 22H2 x64 Home NL

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by horst18519 » Wed Apr 07, 2021 11:30 am

It's in the pipeline. Should be available this week.
- Thorsten -

Image
FSDG-online.com

EBISETTIAYALA
Posts: 1
Joined: Sat Aug 26, 2023 3:29 am
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by EBISETTIAYALA » Sat Aug 26, 2023 3:36 am

Hello everyone from Peru!.

To whom this may concern:

I wanted to know if removing those static airplanes at SPZO is possible. A few weeks ago our Peruvian Community for MSFS2020 did an event called "El Vuelo de los Incas", There were quite a few aircraft landing into SPZO and those static aircraft, the A320 and the Q400 are taking up spaces needed. We would very much appreciate it. Hopefully, this will have an effect cause I placed comments where I bought the scenery quite a while ago without any answer. Thank in advance for your kind help.

KR

EB :blush:

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by horst18519 » Sat Aug 26, 2023 10:56 am

Thanks for your feedback. We are in the process of removing static aircraft and making the respective gates and jetways usable. We will also do this for Cusco, but it will take some time.
- Thorsten -

Image
FSDG-online.com

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by horst18519 » Tue Sep 19, 2023 4:16 pm

FYI: We updated the scenery today. The static aircraft are now removed, several objects have been added to the scenery.
- Thorsten -

Image
FSDG-online.com

qowiboy
Posts: 2
Joined: Thu May 06, 2021 11:40 am
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by qowiboy » Mon Oct 02, 2023 12:23 pm

Thank you so much for your efforts to keep a somewhat aging product still up to date :-) I feel a strong service here that you care not only about the new but all your products!

To my concern, I bought SPZO - Cusco in Marketplace and unfortunately there is still no update available.... do you have any info when this might happen?

Liebe Grüsse
Francis

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: MSFS CUSCO Scenery issues

Post by horst18519 » Mon Oct 02, 2023 12:32 pm

Thanks, we appreciate the feedback.
Unfortunately, the back log in the Marketplace is terribly long at the moment. It will probably take several weeks for them to update our Cusco scenery.
- Thorsten -

Image
FSDG-online.com

Post Reply