NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Sun May 08, 2022 10:46 am
I do not have any glide slopes on the two runways at FALE for P3Dv5. 
FlightSim Development Group
Finest Flight Simulation Products
https://forum.flightsimdevelopmentgroup.com/
NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
https://forum.flightsimdevelopmentgroup.com/viewtopic.php?f=3&t=3363
Page 1 of 1
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Mon May 09, 2022 7:59 am
Which aircraft did you use? Does it also happen with default aircraft?
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Sat Aug 13, 2022 4:02 pm
Hi,
same problem here with a PMDG 777-200, Navigraph Data on a P3D v5 system.
Best regards
Morten
same problem here with a PMDG 777-200, Navigraph Data on a P3D v5 system.
Best regards
Morten
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Sat Aug 13, 2022 6:22 pm
Does the glide slope work if you approach with the default FALE scenery?
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Sun Aug 14, 2022 9:49 am
Hi Thorsten,
Danke für die schnelle Rückmeldung!
In the default scenery - after setting FSDG Durban to "non active" - both ILS 06 and 24 cannot be captured at all. This was found with the PMDG 777 and the default Mooney Bravo. The aerodromes VOR is still available though.
Please let me know when I need to test something on my side.
Viele Grüße
Morten
Danke für die schnelle Rückmeldung!
In the default scenery - after setting FSDG Durban to "non active" - both ILS 06 and 24 cannot be captured at all. This was found with the PMDG 777 and the default Mooney Bravo. The aerodromes VOR is still available though.
Please let me know when I need to test something on my side.
Viele Grüße
Morten
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Sun Aug 14, 2022 9:52 am
Addendum: Also with the P3D default Mooney Bravo no glidepath is available for ILS 06 and 24 in FSDG Durban scenery. LOCs are perfect on both runway ends.
Brgds.
Morten
Brgds.
Morten
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Mon Aug 15, 2022 12:18 pm
Can you please try the attached file?
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Mon Aug 15, 2022 4:55 pm
Hi Thorsten,
ILS 06 (TNI 111.30) is fine now with LOC and GS; ILS 24 (TGI 109.70) shows no signal (neither LOC nor GS).
Brgds.
Morten
ILS 06 (TNI 111.30) is fine now with LOC and GS; ILS 24 (TGI 109.70) shows no signal (neither LOC nor GS).
Brgds.
Morten
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Mon Aug 15, 2022 9:08 pm
Sorry, my bad. Please download and try again.
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Tue Aug 16, 2022 4:18 pm
HI Thorsten,
with the new file flight inspection demonstrated both ILS with LOC and GS being perfectly within tolerance
Many thanks the for great support!
Brgds.
Morten
with the new file flight inspection demonstrated both ILS with LOC and GS being perfectly within tolerance
Many thanks the for great support!
Brgds.
Morten
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Wed Dec 28, 2022 10:20 am
Thanks for this fix guys. I'm a bit disappointed however, that it isn't included in the installer on Simmarket. Just bought the scenery a few days ago and it has the afcad without GS.
Best regards
Adrian
Best regards
Adrian
Re: NO GLIDE SLOPE FALE RWY 06 OR 24 P3Dv5
Posted: Wed Jan 04, 2023 9:13 pm
Which installer version can you download there?