Bremen Airport EDDW problem with SODE-Link

Support for all FSDG products
Post Reply
hansi46
Posts: 10
Joined: Tue Feb 19, 2019 3:33 pm
FS-Version: P3Dv4

Bremen Airport EDDW problem with SODE-Link

Post by hansi46 » Wed Feb 20, 2019 1:54 pm

When I install SODE-link I gets double Jetways!

SODE-link works fine and dock the gates as it should - but it is only one of the Jetways which are moving.

It is the same with the Gates to GA and Lufthasa they are also double.
Attachments
2019-2-20_14-32-26-568 - EDDW Bremen Jetways.jpg

User avatar
horst18519
Posts: 1187
Joined: Thu Dec 15, 2011 4:28 pm

Re: Bremen Airport EDDW problem with SODE-Link

Post by horst18519 » Wed Feb 20, 2019 5:19 pm

You need to disable the static jetways and gates via the Config Tool if you want to use our SODE link.
- Thorsten -

Image
FSDG-online.com

hansi46
Posts: 10
Joined: Tue Feb 19, 2019 3:33 pm
FS-Version: P3Dv4

Re: Bremen Airport EDDW problem with SODE-Link

Post by hansi46 » Wed Feb 20, 2019 6:11 pm

I can not find the option for disabling static Jetways and Gates in the Scenery Configurator.

User avatar
horst18519
Posts: 1187
Joined: Thu Dec 15, 2011 4:28 pm

Re: Bremen Airport EDDW problem with SODE-Link

Post by horst18519 » Wed Feb 20, 2019 7:46 pm

It's in the Bremen tab.
- Thorsten -

Image
FSDG-online.com

hansi46
Posts: 10
Joined: Tue Feb 19, 2019 3:33 pm
FS-Version: P3Dv4

Re: Bremen Airport EDDW problem with SODE-Link

Post by hansi46 » Wed Feb 20, 2019 8:25 pm

It is not in my Scenery Configurator as you can see
Attachments
Scenery Configurator.jpg

User avatar
horst18519
Posts: 1187
Joined: Thu Dec 15, 2011 4:28 pm

Re: Bremen Airport EDDW problem with SODE-Link

Post by horst18519 » Wed Feb 20, 2019 9:32 pm

Please download and install Bremen again, there was a small change in the tool shortly after we released the scenery. Make sure to click "Reset to defaults" in the config tool before re-installing.
- Thorsten -

Image
FSDG-online.com

hansi46
Posts: 10
Joined: Tue Feb 19, 2019 3:33 pm
FS-Version: P3Dv4

Re: Bremen Airport EDDW problem with SODE-Link

Post by hansi46 » Thu Feb 21, 2019 10:58 am

I have today made a new download and a re-installation of Bremen Airport.

I now have the options to deactivate static Jet-ways and Gates in the Scenery Configuration Tool.

So everything works now fine :-)

Thanks for your help.

Post Reply