LGTS v2 - P3Dv3.1 - Elevation Issue

Support for all FSDG products
Post Reply
User avatar
Christopher Barbas
Posts: 19
Joined: Mon Nov 18, 2013 6:38 pm
FS-Version: FS9
Location: Greece - LGTS
Contact:

LGTS v2 - P3Dv3.1 - Elevation Issue

Post by Christopher Barbas » Sun Mar 13, 2016 6:29 pm

Hi all,

just discovered today,

Image

Its only what you are seeing, the small rivers side cement by all over its length and the small bridges with it.

Any thoughts, I have FTX but I have run FTX Vector configurator ( I am doing it always if I install a new addon scenery) and I didnt install anything to Greece at all that could cause something like that.


Thanks
Christopher Barbas

User avatar
Christopher Barbas
Posts: 19
Joined: Mon Nov 18, 2013 6:38 pm
FS-Version: FS9
Location: Greece - LGTS
Contact:

Re: LGTS v2 - P3Dv3.1 - Elevation Issue

Post by Christopher Barbas » Wed Mar 16, 2016 3:42 pm

OK,

I have just installed the v21 and I am having the same issue.
Christopher Barbas

EmilG
Posts: 264
Joined: Fri Dec 16, 2011 10:06 am

Re: LGTS v2 - P3Dv3.1 - Elevation Issue

Post by EmilG » Thu Mar 17, 2016 2:49 pm

Hi Chris, sorry for the delay.
Could you please let me know your terrain and mesh settings? usually low values create this problem, but it might also be smth else.

User avatar
Christopher Barbas
Posts: 19
Joined: Mon Nov 18, 2013 6:38 pm
FS-Version: FS9
Location: Greece - LGTS
Contact:

Re: LGTS v2 - P3Dv3.1 - Elevation Issue

Post by Christopher Barbas » Thu Mar 17, 2016 3:32 pm

Hi Emil,

this is what I have,
ytbfgbfbt.jpg
Christopher Barbas

User avatar
Christopher Barbas
Posts: 19
Joined: Mon Nov 18, 2013 6:38 pm
FS-Version: FS9
Location: Greece - LGTS
Contact:

Re: LGTS v2 - P3Dv3.1 - Elevation Issue

Post by Christopher Barbas » Thu Mar 17, 2016 4:36 pm

You were right Emil,

the "Mesh Resolution" was the problem, a higher setting and the problem has disapperead!

How am I didn't think about it, I am asking my self, I am getting old, sh...t!


Thanks for the help
Christopher Barbas

EmilG
Posts: 264
Joined: Fri Dec 16, 2011 10:06 am

Re: LGTS v2 - P3Dv3.1 - Elevation Issue

Post by EmilG » Fri Mar 18, 2016 1:13 am

Christopher Barbas wrote: I am getting old, sh...t!
Thanks for the help

We all are :)
many times i ve made that mistake myself, that's how i know

Post Reply