Hi guys,
I love your concept of LITE sceneries, and I'm seriously considering your LTFE, Milas Bodrum scenery.
I have one small question though. Looking at images of LTFE on SimMarket, I noticed that the AMAC Aerospace hangar is missing. Is there any chances you might consider updating it?
If you ever decide to add the hangar, here are a few images that may help you.
Location on Google Maps:
https://www.amacaerospace.com/wp-conten ... 6_news.jpg
Real images:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5BF390A1
http://www.timsangse.com/uploads/com.ti ... kapak1.jpg
http://www.kuts.com.tr/assets/img/conte ... las/01.jpg
http://airwaypost.com/wp-content/upload ... 89826.jpeg
The inside:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C309F36
With a parked BBJ 777-200LR:
https://cdnuploads.aa.com.tr/uploads/Ph ... a864c0.jpg
3D rendering:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C035A18
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2E27B9
Capacity:
https://www.amacaerospace.com/wp-conten ... -image.jpg
Thank you.
Aybars
Love the idea of LITE sceneries.
-
- Posts: 4
- Joined: Tue Aug 28, 2018 10:11 am
- FS-Version: FS9
- horst18519
- Posts: 2446
- Joined: Thu Dec 15, 2011 4:28 pm
- FS-Version: MSFS
Re: Love the idea of LITE sceneries.
Thanks for the information. We'll include the hangar in a future update. If you have more material on it feel free to share it here.
-
- Posts: 4
- Joined: Tue Aug 28, 2018 10:11 am
- FS-Version: FS9
Re: Love the idea of LITE sceneries.
Hi Thorsten,
Thank you.
Here are a few more things I could find on it.
Here is an image of the skeleton from the inside, facing south-west:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2F1B94
The large opening of the round "dome" is visible. (See a few lines belove) It is to let large aircraft park inside. The nose of the larger jets go there.
Here facing north-west:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5BFFE2AA
Top down satellite view from Google Earth:
https://c2.staticflickr.com/2/1856/3049 ... 87c7_o.png
The round dome seen on the south is shallow. It is to allow large aircraft to fully park inside.
Like that: https://www.amacaerospace.com/wp-conten ... -image.jpg
https://cdnuploads.aa.com.tr/uploads/Ph ... a864c0.jpg
You can see the 3D render of the hangar/dome on my initial post above, or down below:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2E27B9
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2AE718
Image from the apron. You can see the top is not fully flat. The sliding doors are visible too, on the right side.
https://www.amacaerospace.com/wp-conten ... 172_LR.jpg
For measurements I don't have much unfortunately.
The hangar, cubed: 4,600 m2
The offices and other facilities behind: 1,965 m2
For a grand total of 6565 m2.
(I suck at math )
I know it's quite a bit of guesswork. It's ok I think as informations are scarce. But a 777-200LR has to be able to fully fit inside, and the round "dome" seen on the 3D renderings. Or a 737-800 + A321 side by side wingtip to wingtip.
https://www.amacaerospace.com/wp-conten ... -image.jpg
Aybars
Thank you.
Here are a few more things I could find on it.
Here is an image of the skeleton from the inside, facing south-west:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2F1B94
The large opening of the round "dome" is visible. (See a few lines belove) It is to let large aircraft park inside. The nose of the larger jets go there.
Here facing north-west:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5BFFE2AA
Top down satellite view from Google Earth:
https://c2.staticflickr.com/2/1856/3049 ... 87c7_o.png
The round dome seen on the south is shallow. It is to allow large aircraft to fully park inside.
Like that: https://www.amacaerospace.com/wp-conten ... -image.jpg
https://cdnuploads.aa.com.tr/uploads/Ph ... a864c0.jpg
You can see the 3D render of the hangar/dome on my initial post above, or down below:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2E27B9
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2AE718
Image from the apron. You can see the top is not fully flat. The sliding doors are visible too, on the right side.
https://www.amacaerospace.com/wp-conten ... 172_LR.jpg
For measurements I don't have much unfortunately.
The hangar, cubed: 4,600 m2
The offices and other facilities behind: 1,965 m2
For a grand total of 6565 m2.
(I suck at math )
I know it's quite a bit of guesswork. It's ok I think as informations are scarce. But a 777-200LR has to be able to fully fit inside, and the round "dome" seen on the 3D renderings. Or a 737-800 + A321 side by side wingtip to wingtip.
https://www.amacaerospace.com/wp-conten ... -image.jpg
Aybars
-
- Posts: 4
- Joined: Tue Aug 28, 2018 10:11 am
- FS-Version: FS9
Re: Love the idea of LITE sceneries.
...also you got yourselves a new customer.
- horst18519
- Posts: 2446
- Joined: Thu Dec 15, 2011 4:28 pm
- FS-Version: MSFS
Re: Love the idea of LITE sceneries.
Thanks, we really appreciate that - both.
-
- Posts: 4
- Joined: Tue Aug 28, 2018 10:11 am
- FS-Version: FS9
Re: Love the idea of LITE sceneries.
Happy to help as I can.