Page 1 of 1
Bremen Airport EDDW problem with SODE-Link
Posted: Wed Feb 20, 2019 1:54 pm
by hansi46
When I install SODE-link I gets double Jetways!
SODE-link works fine and dock the gates as it should - but it is only one of the Jetways which are moving.
It is the same with the Gates to GA and Lufthasa they are also double.
Re: Bremen Airport EDDW problem with SODE-Link
Posted: Wed Feb 20, 2019 5:19 pm
by horst18519
You need to disable the static jetways and gates via the Config Tool if you want to use our SODE link.
Re: Bremen Airport EDDW problem with SODE-Link
Posted: Wed Feb 20, 2019 6:11 pm
by hansi46
I can not find the option for disabling static Jetways and Gates in the Scenery Configurator.
Re: Bremen Airport EDDW problem with SODE-Link
Posted: Wed Feb 20, 2019 7:46 pm
by horst18519
It's in the Bremen tab.
Re: Bremen Airport EDDW problem with SODE-Link
Posted: Wed Feb 20, 2019 8:25 pm
by hansi46
It is not in my Scenery Configurator as you can see
Re: Bremen Airport EDDW problem with SODE-Link
Posted: Wed Feb 20, 2019 9:32 pm
by horst18519
Please download and install Bremen again, there was a small change in the tool shortly after we released the scenery. Make sure to click "Reset to defaults" in the config tool before re-installing.
Re: Bremen Airport EDDW problem with SODE-Link
Posted: Thu Feb 21, 2019 10:58 am
by hansi46
I have today made a new download and a re-installation of Bremen Airport.
I now have the options to deactivate static Jet-ways and Gates in the Scenery Configuration Tool.
So everything works now fine :-)
Thanks for your help.