FlightSim Development Group

Hello. Merry Cristmas and Happy New Year!
Some days ago i've update my P3D to v4.4 and there is a problem with altitudes or maybe textures i see. Then i depart from FSIA always normal but then i arrived to FSPP texture of runway placed approx 1 meter above landing surface, my aircraft looks like submerged into runway in a half. But if i start scenario from FSPP to depart everything looks good and problem with textures on arrive in FSIA. In one word problem with textures or altitude only in airport where i arrived. I have totally reinstalled Seychelles scenario - no help.
Thank you.
depart from FSIA (ok): arrive to FSPP (not ok): After sim restart: depart from FSPP (ok): arrive to FSIA (not ok):

Please check if this might help with your problem: viewtopic.php?f=3&t=2470&p=9117&hilit=fsia#p9117

horst18519 wrote:Please check if this might help with your problem: viewtopic.php?f=3&t=2470&p=9117&hilit=fsia#p9117

Hello. No help. Praslin runway look like default mesh used, some hollows across runway i'll try to clear reinstall whole sim

UPD: I found it! It was a Mesh Resolution wrong settings

hello. unfortunally, elevation problem still here. quickfix not help. mech resolution change not help. airlane still undeground on praslin and default textures come to view in some places

Usually those issues appear when the graphics settings differ from the ones we would suggest (like written above) or if there's another addon involved that might change the airport elevation. Which other addons do you use that might interfere? ftx? some mesh addon? AI traffic?

Hello. Can you check my options? And installed Skyforce3d, Pilots - FS Global Ultimate - Next Generation FTX, Spaitraffic7 and Alabeo PA44
[SPOILER] [/SPOILER]
Sorry, don't know how to hide images

That looks ok. I assume there's a conflicting addon at the bottom of the scenery library, though - close to where our FSDG ALT Files entry is. Most likely FS Global, SPAItraffic or ftx.

Later i'll try to manually up the priority of FSDG APT ALT close to FSDG Seychelles. For now priority is 147, dunno why

You will not be able to do that for a good reason. That entry needs to be at the bottom of the list.

it's able by change layer number in add-on.xml but not help anyway. i don't know how to fix it. i don't want to go back to 4.3 where scenery work perfectly((( is that files enough? there is no FSPP

That is correct. Please do NOT edit our add-on.xml files.
There will be no difference between P3Dv4.3 and P3Dv4.4 or 4.5. I'm quite sure one of those other addons contains data that affects the scenery. You might have to uninstall some of them if you want to find the culprit.

No. I've just clear reinstall whole sim (4.5) and install Seychelles scenery only. Same issue

I can't confirm this. Are you sure it was a clean install. Usually, if you uninstall P3Dv4 not all files are removed. We have no troubles with the scenery in v4.4 or v4.5.

manually delete from register all Prepar3d words

It is important that you uninstall P3Dv4 and then remove the folder in which it was installed (for example D:/Prepar3D), then also remove the addon folder (C:\Users\USERNAME\Documents\Prepar3D v4 Add-ons).
The following paths also might not be fully uninstalled/removed automatically:
C:\ProgramData\Lockheed Martin\Prepar3D v4
C:\Users\USERNAME\AppData\Roaming\Lockheed Martin\Prepar3D v4

Only after you removed all those folders a fresh new installation is possible. (Note that you'll also be prompted if you want to add an addon you freshly install (for example FSDG-Seychelles))

of couse done that. and finally, i reinstall p3d same way version 4.1 and look at that... it's normal ! i sad in older version of p3d works correct

This is how it looks on our computers as well - in all P3Dv4 versions.