FlightSim Development Group

Hi guys,

I love your concept of LITE sceneries, and I'm seriously considering your LTFE, Milas Bodrum scenery.

I have one small question though. Looking at images of LTFE on SimMarket, I noticed that the AMAC Aerospace hangar is missing. Is there any chances you might consider updating it?

If you ever decide to add the hangar, here are a few images that may help you.

Location on Google Maps:
https://www.amacaerospace.com/wp-conten ... 6_news.jpg

Real images:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5BF390A1
http://www.timsangse.com/uploads/com.ti ... kapak1.jpg
http://www.kuts.com.tr/assets/img/conte ... las/01.jpg
http://airwaypost.com/wp-content/upload ... 89826.jpeg

The inside:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C309F36

With a parked BBJ 777-200LR:
https://cdnuploads.aa.com.tr/uploads/Ph ... a864c0.jpg

3D rendering:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C035A18
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2E27B9

Capacity:
https://www.amacaerospace.com/wp-conten ... -image.jpg

Thank you.

Aybars

Thanks for the information. We'll include the hangar in a future update. If you have more material on it feel free to share it here.

Hi Thorsten,

Thank you.

Here are a few more things I could find on it.

Here is an image of the skeleton from the inside, facing south-west:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2F1B94
The large opening of the round "dome" is visible. (See a few lines belove) It is to let large aircraft park inside. The nose of the larger jets go there.

Here facing north-west:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5BFFE2AA

Top down satellite view from Google Earth:
https://c2.staticflickr.com/2/1856/3049 ... 87c7_o.png

The round dome seen on the south is shallow. It is to allow large aircraft to fully park inside.
Like that: https://www.amacaerospace.com/wp-conten ... -image.jpg
https://cdnuploads.aa.com.tr/uploads/Ph ... a864c0.jpg

You can see the 3D render of the hangar/dome on my initial post above, or down below:
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2E27B9
https://scontent-frx5-1.xx.fbcdn.net/v/ ... e=5C2AE718

Image from the apron. You can see the top is not fully flat. The sliding doors are visible too, on the right side.
https://www.amacaerospace.com/wp-conten ... 172_LR.jpg

For measurements I don't have much unfortunately.

The hangar, cubed: 4,600 m2
The offices and other facilities behind: 1,965 m2

For a grand total of 6565 m2.

(I suck at math )

I know it's quite a bit of guesswork. It's ok I think as informations are scarce. But a 777-200LR has to be able to fully fit inside, and the round "dome" seen on the 3D renderings. Or a 737-800 + A321 side by side wingtip to wingtip.
https://www.amacaerospace.com/wp-conten ... -image.jpg

Aybars

...also you got yourselves a new customer.

Thanks, we really appreciate that - both.

Happy to help as I can.