It is currently Mon Oct 22, 2018 5:03 pm




 Page 1 of 1 [ 11 posts ] 
Author Message
 Post subject: Squares shapes on trees
PostPosted: Fri Aug 17, 2018 12:33 am 

Joined: Fri Aug 17, 2018 12:20 am
Posts: 6
Hello,

I just have got this squares on every tree at Graz....

Image

How can i solve it, lights look squared too(runways, edge, etc)... Using P3DV4.3

Thanks for support


Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Fri Aug 17, 2018 7:13 am 
User avatar

Joined: Thu Dec 15, 2011 4:28 pm
Posts: 953
I have never seen that effect before. Do you have similar problems with other sceneries?
Try reinstalling the addon.



_________________
- Thorsten -

Image
FSDG-online.com
Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Tue Aug 21, 2018 2:08 am 

Joined: Fri Aug 17, 2018 12:20 am
Posts: 6
Hello Again,

I tried reinstalling, even turning HDR OFF as saw here, but didnt work. Also noticed LM was recommending turning it OFF for some sceneries at V2(old post-mention to not updated sceneries like 100% for that version). But not sure why, may be a texture file type needs to be updated to a different format???.... Once in the past i use to do repaints, so when saving textures(for expl lightings or Shine targa imgs) if you'd mistake the correct format, you'd likely got this kind of things... Its hard to explain, but its like the system filling it all beyond the figures inside the images....so you see the entire rectangle...

Its not happening during the day thoug. During the day its all normal.... :-/

I tweaked ORBX Lights..... neither, not that....

I played with bloom, saturation, etc at HDR tab, didnt work...

Only happening with this airport.... Went to Mauritius, Seychelles & Ayers rock...... its ok for all of them....

:cry:


Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Tue Aug 21, 2018 9:20 am 
User avatar

Joined: Thu Dec 15, 2011 4:28 pm
Posts: 953
All those textures are DXT3 in this case. That should not make any problems. Can you please change the seasonal texture to fall or winter (in the Scenery Configurator) to see if those variations work? Graz is currently the only airport we use that feature on.



_________________
- Thorsten -

Image
FSDG-online.com
Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Tue Aug 21, 2018 5:31 pm 

Joined: Fri Aug 17, 2018 12:20 am
Posts: 6
Tested, its the same, squares everywhere.... Gee.... :-:


Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Tue Aug 21, 2018 5:40 pm 
User avatar

Joined: Thu Dec 15, 2011 4:28 pm
Posts: 953
How does it look at day?



_________________
- Thorsten -

Image
FSDG-online.com
Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Tue Aug 28, 2018 5:20 pm 

Joined: Fri Aug 17, 2018 12:20 am
Posts: 6
During the day it looks normally. Im uploading a pic for you after my actual flight...


Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Sun Sep 02, 2018 2:05 am 

Joined: Fri Aug 17, 2018 12:20 am
Posts: 6
Here two pics during the day... Looks normal:

Image

Image

Thanks in advance for support...


Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Mon Sep 03, 2018 8:57 am 
User avatar

Joined: Thu Dec 15, 2011 4:28 pm
Posts: 953
Have you re-installed the addon? (click restore defaults in the config tool before you do so)



_________________
- Thorsten -

Image
FSDG-online.com
Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Wed Sep 05, 2018 4:34 am 

Joined: Fri Aug 17, 2018 12:20 am
Posts: 6
Allright! Lets make Graz Great Again!!!! :D

Here is how i solved it....

Apparently a texture mixed up among addons, i noticed that Scenery CFG was kind of corrupt, missing addons and were not in correct order.... so these are the steps i followed:

1- Delete Scenery.CFG and clicked "Delete AutoGenerated Files" function inside P3DV4 folder, so many configs returned to default at sim restart...
2- Droped my Scenery.CFG backup in the original position - Programdata/P3DV4 - (manually adding some other sceneries from the day i backed it up).
3- Reinstalled Graz scenery and others needed to reinstall.
4- Ran ORBX configurators(migration, Vector AEC....) making sure to install after all sceneries so i can select to be reinstalled below all my sceneries(There is a procedure in their forum for that).

And voilah!

Few pictures:

Image

Image

I dont know what happened exactly, but i hope this can help anyone with simmilar problems...

Thanks for support and happy flying! :cool:


Offline
 Profile  
 
 Post subject: Re: Squares shapes on trees
PostPosted: Wed Sep 05, 2018 12:43 pm 
User avatar

Joined: Thu Dec 15, 2011 4:28 pm
Posts: 953
Thanks for reporting back.
I can't tell what happened there either but I guess you're right it's good to have this thread if anyone should run into a similar problem in the future.



_________________
- Thorsten -

Image
FSDG-online.com
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 11 posts ] 


Who is online

Users browsing this forum: fabarm and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: