Reunion 1.1 for p3dv4 crashes

Support for all FSDG products
AFR6752
Posts: 72
Joined: Sat Sep 02, 2017 9:02 pm
FS-Version: P3Dv3

Re: Reunion 1.1 for p3dv4 crashes

Post by AFR6752 » Thu Sep 07, 2017 9:45 am

horst18519 wrote:No problem with this file as well. Are you sure the CTD is realted to our scenery? You have a big number of addons and if I understand correctly you said the scenery worked just fine after a new install?
Yes it has to be, once I remove the addon xml files for Reunion and start p3d v4 again, it loads everything in fine.

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: Reunion 1.1 for p3dv4 crashes

Post by horst18519 » Thu Sep 07, 2017 9:46 am

Did the scenery work before?
- Thorsten -

Image
FSDG-online.com

AFR6752
Posts: 72
Joined: Sat Sep 02, 2017 9:02 pm
FS-Version: P3Dv3

Re: Reunion 1.1 for p3dv4 crashes

Post by AFR6752 » Thu Sep 07, 2017 7:20 pm

horst18519 wrote:Did the scenery work before?
I was able to load it once but forgot what settings in the configuration program I had set. There must be a bgl file not compatible with p3dv4 like a ground traffic or effect file. Not time until the weekend for me to play with the settings again is there anything you could check or even remote into my computer to see?

AFR6752
Posts: 72
Joined: Sat Sep 02, 2017 9:02 pm
FS-Version: P3Dv3

Re: Reunion 1.1 for p3dv4 crashes

Post by AFR6752 » Sat Sep 09, 2017 4:13 am

There are 92 bgl files in my scenery folder for Reunion is that right? It is an effect or bgl file causing this.

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: Reunion 1.1 for p3dv4 crashes

Post by horst18519 » Sat Sep 09, 2017 8:37 am

Actually there should only be 91 files and not all of them should be bgl files since some are optional and set to .off.
I don't think that's the source of the problem though.
To limit the number of possible sources please open the add-on.xml file in the FSDG-Reunion folder and remove the following content:

Code: Select all

    <AddOn.Component>
        <Category>SimObjects</Category>
        <Path>SimObjects\Airplanes</Path>
        <Name>FSDG-Reunion-AI-SimObjects</Name>
    </AddOn.Component>
    <AddOn.Component>
        <Category>Texture</Category>
        <Path>Texture</Path>
        <Name>Reunion Autogen Textures</Name>
		<Type>GLOBAL</Type>
    </AddOn.Component>
- Thorsten -

Image
FSDG-online.com

MOISE
Posts: 25
Joined: Thu Sep 07, 2017 1:08 pm
FS-Version: FS9

Re: Reunion 1.1 for p3dv4 crashes

Post by MOISE » Sat Sep 09, 2017 3:26 pm

Hello
I have the FSDG REUNION scenery and I am confronted with the problem of crashes on FMEE final.
I don't know if I have version 1.0 or 1.1
How to know it please.
Where find the update?

Thanks

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: Reunion 1.1 for p3dv4 crashes

Post by horst18519 » Sat Sep 09, 2017 5:09 pm

The name of the installer tells you which version. Where did you purchase it?
- Thorsten -

Image
FSDG-online.com

MOISE
Posts: 25
Joined: Thu Sep 07, 2017 1:08 pm
FS-Version: FS9

Re: Reunion 1.1 for p3dv4 crashes

Post by MOISE » Sat Sep 09, 2017 5:24 pm

horst18519 wrote:The name of the installer tells you which version. Where did you purchase it?
The name is: FSDG-REUNION_P3DV4
Purchase at simmarket

There is no link for update ?

AFR6752
Posts: 72
Joined: Sat Sep 02, 2017 9:02 pm
FS-Version: P3Dv3

Re: Reunion 1.1 for p3dv4 crashes

Post by AFR6752 » Sat Sep 09, 2017 6:26 pm

horst18519 wrote:The name of the installer tells you which version. Where did you purchase it?
My installer is Aerosoft and the file name is FSDG-REUNION_P3DV4.exe and the detail properties say product version 2.0.0.44
That's the old installer not v1.1?

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: Reunion 1.1 for p3dv4 crashes

Post by horst18519 » Sat Sep 09, 2017 7:53 pm

That should be the most recent version. Where did you epxerience the crash? Which aircraft did you use?
- Thorsten -

Image
FSDG-online.com

AFR6752
Posts: 72
Joined: Sat Sep 02, 2017 9:02 pm
FS-Version: P3Dv3

Re: Reunion 1.1 for p3dv4 crashes

Post by AFR6752 » Sat Sep 09, 2017 8:18 pm

horst18519 wrote:That should be the most recent version. Where did you epxerience the crash? Which aircraft did you use?
any default aircraft

MOISE
Posts: 25
Joined: Thu Sep 07, 2017 1:08 pm
FS-Version: FS9

Re: Reunion 1.1 for p3dv4 crashes

Post by MOISE » Sun Sep 10, 2017 6:00 am

I use 777 pmdg.
My problem is : At the announcement one hundred there is a kind of "trembling" and the plane hardly touches the ground

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: Reunion 1.1 for p3dv4 crashes

Post by horst18519 » Sun Sep 10, 2017 9:08 am

Where does that crash happen? (which runway)
- Thorsten -

Image
FSDG-online.com

MOISE
Posts: 25
Joined: Thu Sep 07, 2017 1:08 pm
FS-Version: FS9

Re: Reunion 1.1 for p3dv4 crashes

Post by MOISE » Sun Sep 10, 2017 6:48 pm

horst18519 wrote:Where does that crash happen? (which runway)
I don't know if the question is addressed to me but my problem arises when landing on track 14. It does not do it every time. So I do not understand where it comes from.

AFR6752
Posts: 72
Joined: Sat Sep 02, 2017 9:02 pm
FS-Version: P3Dv3

Re: Reunion 1.1 for p3dv4 crashes

Post by AFR6752 » Mon Sep 11, 2017 6:26 pm

MOISE wrote:
horst18519 wrote:Where does that crash happen? (which runway)
I don't know if the question is addressed to me but my problem arises when landing on track 14. It does not do it every time. So I do not understand where it comes from.
If you have Orbx Vector you have to run the airport elevation correction scanner and make sure it finds FMEE and disables the Orbx afcad and elevation files. edit an in addition I do not believe the orbx program can scan any scenery that uses the addon.xml rather than scenery.cfg entries so you must manually enter FMEE in the Orbx scanner to disable.

AFR6752
Posts: 72
Joined: Sat Sep 02, 2017 9:02 pm
FS-Version: P3Dv3

Re: Reunion 1.1 for p3dv4 crashes

Post by AFR6752 » Tue Sep 12, 2017 2:13 am

[quote="horst18519"][/quote]

VOBL installed just great not a single error but Reunion refuses to load. Is there something else I can try to get Reunion loading?

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: Reunion 1.1 for p3dv4 crashes

Post by horst18519 » Tue Sep 12, 2017 9:50 am

If the scenery worked before I don't think there's a general error with the installation. Maybe the AI traffic provokes the crash. What you can try is to remove the following content from the add-on.xml in the FSDG-Reunion folder:
horst18519 wrote:Actually there should only be 91 files and not all of them should be bgl files since some are optional and set to .off.
I don't think that's the source of the problem though.
To limit the number of possible sources please open the add-on.xml file in the FSDG-Reunion folder and remove the following content:

Code: Select all

    <AddOn.Component>
        <Category>SimObjects</Category>
        <Path>SimObjects\Airplanes</Path>
        <Name>FSDG-Reunion-AI-SimObjects</Name>
    </AddOn.Component>
    <AddOn.Component>
        <Category>Texture</Category>
        <Path>Texture</Path>
        <Name>Reunion Autogen Textures</Name>
		<Type>GLOBAL</Type>
    </AddOn.Component>
- Thorsten -

Image
FSDG-online.com

AFR6752
Posts: 72
Joined: Sat Sep 02, 2017 9:02 pm
FS-Version: P3Dv3

Re: Reunion 1.1 for p3dv4 crashes

Post by AFR6752 » Tue Sep 12, 2017 2:46 pm

horst18519 wrote:If the scenery worked before I don't think there's a general error with the installation. Maybe the AI traffic provokes the crash. What you can try is to remove the following content from the add-on.xml in the FSDG-Reunion folder:
horst18519 wrote:Actually there should only be 91 files and not all of them should be bgl files since some are optional and set to .off.
I don't think that's the source of the problem though.
To limit the number of possible sources please open the add-on.xml file in the FSDG-Reunion folder and remove the following content:

Code: Select all

    <AddOn.Component>
        <Category>SimObjects</Category>
        <Path>SimObjects\Airplanes</Path>
        <Name>FSDG-Reunion-AI-SimObjects</Name>
    </AddOn.Component>
    <AddOn.Component>
        <Category>Texture</Category>
        <Path>Texture</Path>
        <Name>Reunion Autogen Textures</Name>
		<Type>GLOBAL</Type>
    </AddOn.Component>
That did not fix my ctd, p3dv4 does not show the loading screen unless I remove the 2 addon.xml files for the Reunion scenery

User avatar
horst18519
Posts: 2321
Joined: Thu Dec 15, 2011 4:28 pm
FS-Version: MSFS

Re: Reunion 1.1 for p3dv4 crashes

Post by horst18519 » Tue Sep 12, 2017 2:53 pm

If you remove the add-on.xml in the FSDG-Reunion folder and start P3D, shut down P3D, add the add-on.xml again and start P3D it should ask you if FSDG-Reunion should be added to P3D. Does this happen?
If not there must be some relict of a previous installation somewhere in the P3D files, be it the add-ons.cfg, the scenery_add-on.xml or the scenery.cfg.
- Thorsten -

Image
FSDG-online.com

AFR6752
Posts: 72
Joined: Sat Sep 02, 2017 9:02 pm
FS-Version: P3Dv3

Re: Reunion 1.1 for p3dv4 crashes

Post by AFR6752 » Tue Sep 12, 2017 10:53 pm

horst18519 wrote:If you remove the add-on.xml in the FSDG-Reunion folder and start P3D, shut down P3D, add the add-on.xml again and start P3D it should ask you if FSDG-Reunion should be added to P3D. Does this happen?
If not there must be some relict of a previous installation somewhere in the P3D files, be it the add-ons.cfg, the scenery_add-on.xml or the scenery.cfg.
It happens, the addon is added by p3d again. There is no conflict I can see, and other scenery is fine like your just released VOBL.

Post Reply